eu

Vacuum Track System

Promotech’s vacuum fixing system provides firm grip of rail tracks on both ferromagnetic and non-ferromagnetic materials. Lightweight and modular design enables easy adjustment and fitting of the system to specific needs depending on welding or cutting applications and working positions (e.g. flat, horizontal, or vertical). A vacuum fixing system can be applied to both rigid and semi-flexible tracks to enable usage on surfaces with a radius of more than 5 m (16 ft).

  • Back up a reservoir for added safety in case of a power failure; a back-up vacuum offers additional time to safely secure
  • A welding tractor and tracks; also greatly reduces the installation time of the whole system
  • Maximum plate temperature up to +320°C (608°F)
  • Only 100 mm (4”) minimal distance from the heat source to the vacuum pads
Obejrzyj video Play Pobierz PDF Download Wyślij Zapytanie Email
Vacuum Track System

Se pueden conectar hasta 4 rieles por separado para permitir el avance alternado (rail leapfrogging) durante el funcionamiento.

La carga permitida es de hasta 30 kg (66 lb) – tractor de soldadura/corte con accesorios.

El riel semi-flexible permite la fijación en superficies curvas con un radio de al menos 5 metros (16 pies).

Specyfikacja techniczna

Promotech’s system consists of a vacuum pump that generates vacuum and of vacuum units that fix the semiflexible or rigid track to the surface. A single pump provides gauge pressure sufficient for up to 21 vacuum units. A single vacuum unit provides suction power of 1400 N (at gauge pressure of –0.7 bar / –10 psig). The permitted load is up to 30 kg (66 lbs) – welding/ cutting tractor with accessories. Semi-flexible track can be fixed on flat or curved surfaces with a radius of at least 5 meters (16 ft). An optional manifold can separately connect vacuum units of up to four rails, what allows rail leapfrogging during operation. Temperature of material on which vacuum pads are used cannot exceed +320°C (608°F). Heat source must be kept at least 100 mm (4″) away from vacuum pads. Safety eye bolts are provided to suspend vacuum rail tracks and protect them against accidental fall.

Vacuum Track System Parameters

Maximum number of vacuum units per vacuum pump21
Minimum curvature radius of a semi-flexible track5 m (16 ft)
Vacuum unit holding force1400 N
(at gauge pressure of –0.7 bar / –10 psig)
Working positionsflat, horizontal, vertical
Maximum permitted track load30 kg (66 lbs)
Required number of vacuum units per rail placed in horizontal position4
Required number of vacuum units per rail placed on walls or curvatures7
Permitted ambient temperature near vacuum unitsfrom –20°C to 200°C
(from –4°F to 392°F)

Portable Vacuum Pump Parameters

Voltage1~ 230 V, 50–60 Hz
1~ 115 V, 50–60 Hz
Power400 W
Gauge pressure obtainable–0.8 bar (–11.5 psig)
(where 0 is for atmospheric pressure, and –1 is for perfect vacu
Pump capacity4 m3/h (141 ft3/h)
Ambient temperature0–40°C (32–104°F)
Safety reservoir volume10 l (0.35 ft3)
Weight (with safety reservoir)23 kg (51 lbs)

Systeme de Rail a Ventouses

1.83 MB
Pobierz PDF

Zapytanie Produktowe

Potrzebujesz więcej informacji o naszych rozwiązaniach przemysłowych? Porozmawiajmy! Wypełnij poniższy formularz, a nasz zespół szybko Ci pomoże. Jesteśmy tutaj, aby pomóc Ci znaleźć odpowiedni produkt dostosowany do Twoich potrzeb.